The Application Kit

Most people put a card sticker on by eye, and most of the time that works. The Application Kit takes the guesswork out: it holds your card and guides the sticker into place, so the edges line up and the chip window sits exactly over the chip.

How the Application Kit works

1. Place your card in the trayYour card clicks in, and the raised borders hold it firmly in place.
2. Press your sticker downPeel the sticker off its backing and lower it into the tray. The borders guide it into line with your card, chip window over the chip, then press it down from the middle out.
3. Pop your card outTake your card out of the tray. The sticker sits straight, every time.

Why people add it

• Straight edges on the first try: no sticker sitting slightly off to one side.
• The chip window where it belongs: the tray lines the cut-out up with your chip, and the chip should never be covered.
• Fewer second attempts: every time a sticker is lifted and laid down again, dust can get underneath. Getting it right the first time avoids that.
• A finish that looks professional: ideal if it is your first card sticker, or if the sticker is a gift for someone who has never applied one.

Do I need the Application Kit?

No. You can put a Pettypurse sticker on without it in about 30 seconds: clean the card, peel off the backing, line up the chip window and press it down. The Application Kit is for anyone who wants it perfectly straight without fiddling, and for gifts.

Questions about the Application Kit